Equipment

This is the core equipment I use to work on projects. I also have portable bandsaws, chop saws, angle grinders, and many more tools I use on job sites, along with a number of other tools like drill presses at my shop. These are just my major pieces of equipment I use.

20200208_221220.jpg

Welder

Miller Electric Multimatic 220 AC/DC

Can be used for AC and DC TIG (for mild and stainless steel, and aluminum), MIG, Flux Core, and Stick.

Can be used on both 110-120 volt or 220-250 volt power

TIG

The machine can do carbon “mild” steel, stainless steel, and aluminum in thicknesses from 18 gauge (.0478”, 1.214 mm) to 1/4” (6.35 mm).

I use mainly ERS70S-2 for mild, 308 for stainless, and 4043 for aluminum.

MIG/Flux core

It can do mild steel from 18 (.0478”, 1.214 mm) gauge to 1/2”+ (12.7 mm+).

I mainly use .030” ERS70S-6 wire for MIG, and .035” E71G-TS for flux core.

Stick

It is capable of welding mild steel from 1/8” (3.175 mm) to 1/2”+ (12.7 mm+).

I use mainly 6010 and 7018 rods.

20200423_204005.jpg

Plasma Cutter

Hypertherm Powermax 45 XP

Can be used to cut any conductive material up to 1 inch (2.5 cm) thick, pierce holes up to 3/8 inch (.95 cm), and gouge up to 7.5 lbs/h (3.4 kg/h) with a .26”x .12” (6.8mm x 3.2mm) groove. Uses 22o volt power supply.

20200424_163931.jpg

Air Compressor

Puma 5.5 HP 20 Gallon Gasoline Portable Air Compressor

11 cfm @90 psi, 135 max psi.

I also have a portable air dryer, and air lubricator unit to run my air tools with. The majority of my equipment is also equipped with Milton high flow fittings.

 
20200213_173018.jpg

Generator

Predator 9000 Watt Portable Gasoline Generator

9000 watt max, 7250 continuous output, can produce both 120 and 240 volt power.